Combination ladders can be used as leaning ladders as well as free-standing A-type ladders.
| Product models |
|---|
- Overview
- Dimensions and specifications
Overview
The torsional rigidity of the combination ladders is guaranteed by using the housing profile as side rafters. The grooved step surfaces of the sides are horizontal when the ladder is in the operating position. In this case, the ladder is comfortable to use, and when used as a leaning ladder, the safe leaning angle of the ladder can be found effortlessly. The anti-slip bars on the legs and lower support bar provide good grip on the ladder. When choosing the length of a combination ladder, it is worth noting that when using a ladder as a leaning ladder, the top three spools should be left unused. They act as a support and reduce the risk of falling.
User manual for Combination ladder: User_manual_pdf.
Our ladders are safe to use, when they are operated correctly. Read more from the “safe use of the ladders”.
- Side depth of 30 mm
- Standard lower support bar to prevent the ladder from tipping sideways
- Meets the EN-131 standard
Dimensions and specifications
CODE | STEPS | WIDTH | LOWER SUPPORT BAR WIDTH | WEIGHT | TOP STANDING HEIGHT WITH A-LADDER | OVERALL LENGHT | TRANSPORT LENGHT | SUITABLE ROOF-/WALL SUPPORTER (accessories) |
KTY-360 | 3 x 8 pcs | 48 cm | 110 cm | 16,5 kg | 209 cm | 583 cm | 249 cm | |
KTY-375 | 3 x 10 pcs | 48 cm | 130 cm | 27 kg | 268 cm | 753 cm | 307 cm | |
KTY-390 | 3 x 12 pcs | 48 cm | 140 cm | 28,5 kg | 322 cm | 893 cm | 360 cm |
We also recommend
The transport rack for the leaning and combination ladders is attached to the car’s load rack or directly to the roof. Each ladder model has its own rack, so the ladder model must be stated when ordering the transport rack. The transport stand is suitable for 2- and 3-part ladders made by Suomi-Tikas.
Roof supporter leans on to the roof with soft D-rubber shoes and keeps ladders away from the eaves protecting them from being damaged. Roofsupporter-75 is compatible only with other Suomi-Tikas products.
Wall supporter leans on to the wall with soft D-rubber shoes and keeps the ladder of the wall. Wall supporter-60 is compatible only with Suomi-Tikas products.
Adjustable legs enable ladders to be used safely even on grounds that are not even and therefore ladders cannot be set straight.